Both the soldering iron and the soldering station are welding tools that must be used for soldering electronic products. The soldering station is an upgraded version based on the soldering iron, which is more powerful and more convenient to use.

AiXun T3A is the world's first 200w fully intelligent soldering station. Compatible with T12/936/T245 three handles, suitable for various scenarios.With intelligent temperature control system, it can quickly heat up to 380℃ in 3 seconds, and the temperature accuracy deviation is less than 1%, which is most suitable for mobile maintenance and precision welding of high-end electronic products. 2.4" LCD digital colour display for better visual enjoyment and to help you work more efficiently. Intelligent operating habit memory can help extend the life of the soldering station and soldering tips. This is a must-have soldering station, especially for cell phone repair stores.

Do not remove the excess solder from the soldering iron tip before closing the soldering station, the excess tin will protect the tin surface and prevent it from oxidizing while the soldering iron tip is still hot. Do not add any compound to the tin surface.

When soldering, flux is applied to the electrical leads to be soldered, it helps to remove oxidation and prevents airflow to the leads, preventing further oxidation. Solder adheres more easily to unoxidized metal, which will cause the solder to flow evenly over the electrical leads. Since the solder is evenly present in the electrical leads, its conductivity is also improved.

Smart Desoldering station iHeater Pro V1.09: repair the compatibility problem of USB driver Upgrade your iHeater Pro now and enjoy better usage experience！

The main difference between T420D and T420 soldering station is: T420D soldering station is equipped with a double station, which can work with two soldering pens at the same time; the T420 intelligent soldering station is equipped with a single station, and only one handle can work.

October 10th, 2022，ISLAND ROCK team from Dubai visited AiXun to discuss further cooperation. ISLAND ROCK is the head of a leading company in the soldering tool industry in Dubai. The purpose of the visit is mainly to discuss our further cooperation in the near future!

Step 1: We prepare the common tools for tin planting and clean the chip and the corresponding tin planting board hole of the chip. Step 2: Fix the chip on the tin planting board with label paper, and then fill the solder paste with a blade. Step 3: Use tweezers to press the tin planting board and heat it with the nozzle of the hot air gun, make sure to master the temperature of the air gun (generally around 400 degrees), the wind (do not exceed 1.5) and the height (2.5cm). When heating, move left and right slightly to heat the tin planting board evenly. And when the solder paste turns into a spherical shape, it means that the solder paste is melted, and then you can stop it.